Proof Research has made it easier than ever to add their match winning barrels to your rifle. Owners of the Ruger Precision Rifle can order replacement Carbon Fiber or Stainless Steel barrels from Stockysstocks.com. The barrels will arrive pre-fit and ready to install without any machine work necessary. There is no need to send your rifle off for months while you wait to have a barrel fitted. Proof Research Carbon Fiber Barrels start at $940 and their Stainless Steel version start at $469.99. Stocky’s has them on sale currently for $846.99 and $439.99 respectively. Continue reading Proof Research Releases Pre-Fit Carbon Fiber Barrels for the Ruger Precision Rifle
One of the firs things we noticed when we started this project was how horrible the factory trigger on our 10/22 was. Not only was it very heavy for a light rifle, but when loading pressure the trigger would “creep” forward before eventually breaking. This is not a good situation for overall accuracy. The factory pull weight was close to six pounds. This makes it very difficult to keep precise sight alignment on a light weight rifle. The angle of the wrist portion of the stock also made it extremely difficult to get a “straight to the rear” pull. I knew that in order to get any meaningful results from our modifications, we would need to address the trigger. Continue reading Ruger 10/22 Tactical Trainer (Part 2 do-over) Ruger BX-Trigger
We have had some issues with our Ruger 10/22 Build. The accuracy we were seeing was not consistent with what we should have been getting from our modifications. When this occurs, we usually look to the weakest part first. In this case, it was our scope and mounting system. The old Tasco Golden Antler scope did not inspire confidence. It worked fine on one of our older .22 bolt guns, but we think it may have chosen this project to give up the ghost. So to resolve this situation and get back on track, we installed a SS 3-15×42 FFP rifle scope from SWFA Outdoors. To make sure the scope wasn’t going anywhere, we used a set of SWFA rings and a 20 MOA base from Evolution Gun Works. Granted, six screw caps are a little overkill for a .22LR, we can be sure that the system will hold tight after some chance encounters with the barricade. Continue reading Ruger 10/22 Tactical Trainer (Part 1 do-over) SWFA Scope Installation
Once we checked the accuracy of our stock rifle, it was time to make some changes. First, we decided to replace the factory wood stock with something more appropriate to our goal. The factory wood is fine for a boys plinking rifle, but it is really too small for an adult. The stock was designed for use with iron sights and the comb is too low for a proper cheek weld with a rifle scope. Even with our scope mounted as low as possible, we end up with more of a “chin weld.” Continue reading Ruger 10/22 Project – Stock Replacement
The Ruger 10/22 is one of the most popular .22 caliber rifles available today. Over five million have been produced. Needless to say there is an enormous selection of parts available to customize the rifle for almost any purpose.
Before we start down that road, it is important for us to gauge the accuracy of the rifle in its stock condition. It doesn’t do any good to add a component that reduces the overall accuracy.
Our Ruger 10/22 Carbine comes from the factory with a set of fairly serviceable iron sights. They are the adjustable bead and notch type. In my youth, many a rabbit fell to a .22 equipped with these sights. While they may be just fine for plinking and hunting small game, they are nowhere near adequate for a precision training rifle. Continue reading Ruger 10/22 Project – Baseline