Magpul PMAG 21 GL9 Glock Magazine Review

We have been using the Pmag 17 GL9 in our Glock 17 for several months now. In competition and training we have put thousands of rounds through them without issue. When Magpul announced the release of the Pmag 21 GL9, we rushed to get our hands on one.

Magpul Pmag 21 GL9The Pmag 21 GL9 looks identical to the Pmag 17 GL9. The Pmag 21 extends from the bottom of the Glock 17 in order to make room for those four extra 9mm cartridges. The Pmag 21 also has 10, 15 and 21 round witness holes in the side.

Magpul Pmag 21 GL9The Pmag 21 GL9 uses the same floor plate as the Pmag 17. This includes the “dot matrix” marking area. This also means that the Pmag 21 will accept the Magpul L-Plate rubberized floor plate. If you are not forced to work within competition magazine length rules, the L-Plate is a worthy upgrade for these magazines.

We ran the Pmag 21 GL9 hard for 150 rounds to get a feel for the reliability. We did not have a single stoppage that I could attribute to the magazine. The mag-dumps were flawless. We ran 50 repetitions of “one-shot” drills to see how reliably the Pmag 21 would lock the slide back on our Glock 17. We only encountered one instance where the slide failed to lock. We could not reproduce the error.

If you have a need to gas up your Glock with 21 round magazines, the Magpul Pmag 21 GL9 is a great option. At $19.95 MSRP they are the most cost-effective method at increasing the magazine capacity of your Glock. Hopefully Magpul will have the 27 round version out soon!


Thyrm SwitchBack Review on the Surefire G2X

We recently came across a novel product from Thyrm LLC. The SwitchBack Flashlight Ring adapts your flashlight into a more versatile, tactical tool for concealed handgun carry.

Over the years I have used many different flashlight techniques while shooting a handgun. The “Chapman”, “Harries”, “Rogers”, “FBI”, etc. all work with varying degrees of efficiency. All take away points of contact on the handgun when compared to a standard two handed grip. This drawback paved the way for weapon lights to take over the professional sector.

In the concealed carry world, a weapon light causes some new difficulties. Weaponlight holsters are bulky and most sub-compact handguns are not designed to accept weapon lights. Now we are back to having to use one of the old-school flashlight techniques, while minimizing loss of contact on the weapon.

Thyrm LLC’s SwitchBack helps to solve some of these problems. The SwitchBack is a simple polymer ring that slips over the tail cap on a variety of popular tactical lights.

IMG_4980In use, the index finger of the shooter’s support hand goes through the loop with the rest of the flashlight body pointing down in the palm of the hand. This is what I refer to as the “utility” grip. During my testing, I found that it is a very secure way to hold the light for most tasks that do not involve a firearm. For regular searching I would hold the flashlight in the center of my chest, palm down. If I needed to draw my handgun, but did not have a threat, then I could use the “FBI Technique” where the light is held high and away from the body.

Thyrm SwitchbackWhen it was time to bring up your handgun and light up a target, you allowed the light to rotate around your index finger, pivoting on the ring. This brought the tail cap switch into contact with your middle finger. The “bump” on the ring falls perfectly under the pad of your thumb. In this position, pushing forward with your thumb causes the light to pivot on the ring and press the tail cap switch, momentarily illuminating the light. I will refer to this as the “tactical” grip.

Once you have the light in the “tactical” grip your middle, ring and pinky finger are free to wrap around your strong hand and assist in keeping your weapon on target. In use I found this grip to be much more stable than the G2Z in a “Surefire/Rogers” grip.

During our test I installed the Thyrm LLC, SwitchBack on a Surefire G2X light. Initially we used the stock Surefire momentary switch. At first the switch was very hard to depress, but as it broke in it became easier to activate the light in the “tactical” position. Later we swapped out the factory momentary switch for a “clicky” switch. This made is easier to activate in momentary on. The fit of the SwitchBack on our G2X made it almost impossible to twist the tail cap for constant on. The installation of the “clicky” switch solved this problem. I definitely suggest using an aftermarket “clicky” switch or selecting one of Surefire’s other models if you intend to add a SwitchBack.

Thyrm LLC was also smart enough to add a pocket clip to the body of the SwitchBack. This clip makes it very easy to keep the attached light high in a pocket for quick deployment. In civvies, it allowed me to clip the light in my support side pants pocket with no problems. I never once had anyone ask about it. In uniformed use, it clipped perfectly inside my cargo pocket divider on my 5.11 Stryke pants.

The biggest benefit to a non-weapon mounted light is during non-gun situations. Sometimes, 500 lumens of white light may be enough to discourage whatever antisocial behavior had arisen. Other times I may require a more personal non-lethal response. When going “hands-on” the G2X and Thyrm SwitchBack have some added advantages. The G2X features an aluminum head and slightly toothy bezel. In a downward strike it can dissuade an attacker from continuing his hostile actions. When held in the “utility” grip, the SwitchBack places the thumb “bump” directly at the index finger’s middle knuckle. This could provide a focused strike, or even better apply a great deal of force to a pressure point for pain compliance. Thankfully there was not a need to test either of these features during this review.

Thyrm Switchback

With a $19.99 purchase price, the Thyrm LLC, SwitchBack offers a lot of value.  Even if you do not currently have a light that the SwitchBack will fit, I feel it is worth the expense to purchase one if you routinely carry a non-weaponligth handgun.

Magpul PMAG 17 GL9 Glock Magazine Review

The Glock 17 is arguably one of the most popular combat handguns since the 1911 or Hi-Power. They are relatively inexpensive, and easy for novices to shoot. While the handgun itself is relatively inexpensive, the magazines are not. Until recently, Glock has had a monopoly on magazines to feed your 9mm Glock. This has kept retail prices around $25 with LE pricing not much lower. This reason alone caused me to perk up when Magpul announced a Glock compatible Pmag. Continue reading Magpul PMAG 17 GL9 Glock Magazine Review

2016 Sniper’s Hide Cup

This year I had the pleasure of competing in the 2016 Sniper’s Hide Cup. The “Hide Cup” was shot on private property near Colville, WA. The location is notable for being the most scenic I have ever shot in. There were lush mountain sides and deep valleys. One hundred and forty eight shooters turned out to brave the weather for two and a half days of “field” shooting. Continue reading 2016 Sniper’s Hide Cup

Modular Driven Technologies TAC 21 Chassis Review

Modular Driven Technologies is a Canadian based company that has been making rifle accessories for some time now. In the past we have reviewed the LSS chassis and the HS3. After reviewing those systems, we received several requests to review the TAC21. The MDT TAC21 Chassis predates the LSS and HS3. It seems to sit at the opposite end of the design spectrum. All three chassis use AR type stocks and grips. The LSS and HS3 take an almost minimalist approach to chassis design. The TAC21 is a behemoth in comparison. Continue reading Modular Driven Technologies TAC 21 Chassis Review

Lapua Brass for the 6.5 Creedmoor coming soon.

In a recent thread on Accurateshooter.com, Kevin Thomas from Lapua stated that they are currently working on 6.5 Creedmoor brass. This may be the first reason we have to look forward to the 2017 SHOT Show. 

“May as well go ahead and drive a stake through the heart of this thread right now; Yes, we currently have 6.5 Creedmoor in to works. We discussed this one at length in Finland during a new products development meeting a few months back. Several of us were pushing this one rather hard, due to the tremendous feedback we’d taken on the cartridge, and the popularity that the cartridge has already earned. Not a big one in Europe, but the US market is a significant share of our business, and we most definitely do listen to customer input. The first set ups are currently being done, and the initial trial run and in-house testing will be done shortly after that. If all goes well, we’ll move on with production and hopefully make the formal introduction of this one during the SHOT show in January.
Hang on guys, it’s coming.”

Kevin Thomas’ post on Accurateshooter.com

S2 for Operational Snipers and Precision Marksmen